ISO 23472-4:2022 pdf download – Foundry machinery — Vocabulary — Part 4: Abrasive blasting machines and other equipment related to cleaning and finishing for casting.
1 Scope This document defines a set of terms and definitions of abrasive blasting machines and other equipment related to cleaning and finishing for casting in foundry machinery. It applies to standard development in the foundry machinery field, technical documentation, related scientific and technical publications, etc. 2 Normative reference There are no normative references in this document. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminology databases for use in standardization at the following addresses: — ISO Online browsing platform: available at https:// www .org/ obp — IEC Electropedia: available at https:// www .electropedia .org/ 3.1 abrasive blasting shot blasting process in which workpiece to be cleaned or surface to be treated is subjected to continuous attack by abrasive media (3.4) to achieve a desired result [SOURCE: ISO 23472-1:2020, 3.1] 3.2 abrasive blasting machine shot blasting machine machine used for abrasive blasting (3.1) by either centrifugal force or compressed air to accelerate abrasive media (3.4) Note 1 to entry: Terms “abrasive blasting machinery”, “shot blasting machinery” are used to address the same assembly of machines. 3.3 abrasive cut-off machine grinding cutter device for cutting gate and riser of castings or other metal materials with a high-speed rotating grinding wheel (3.84)
3.4 abrasive media shot blasting media granular metallic or non-metallic material to be forcibly applied to a surface to achieve a desired result Note 1 to entry: Classification of metallic abrasives is provided in ISO 11124-1, and of non-metallic abrasives in ISO 11126-1. [SOURCE: ISO 23472-1:2020, 3.3] 3.5 abrasive media recirculating system system in abrasive blasting machine (3.2) that collects the mixture of abrasive media (3.4) and abrased material, separates the abrasive media (3.4) from this mixture, and supplies it to the blasting process Note 1 to entry: This system usually consists of bucket elevator (3.25), screw conveyor, abrasive media separator (3.6), vibrating screen, storage hopper, switch valve (3.72), pipe, etc. 3.6 abrasive media separator device that removes impurities from used abrasive media (3.4) and separates reusable abrasive media (3.4) by means of gravity, air stream, mesh screen and/or magnetic force 3.7 abrasive media throughput rate abrasive media flow rate amount of abrasive media (3.4) blasted by the wheel blaster (3.86) or air blaster (3.8) in unit time during abrasive blasting (3.1) Note 1 to entry: Usually in minutes as unit time. 3.8 air blaster assembly consisting of blast nozzle(s) (3.16), blast pot(s) (3.17) and connected hose(s) or tube(s), which accelerates abrasive media (3.14) by pressurized air 3.9 air blasting machine abrasive blasting machine (3.2) that uses air blaster (3.8) 3.10 air chipper hand-held pneumatic tool for removing flashes, burrs and raised defects of castings 3.11 automatic cleaning cell system that automatically completes the cleaning process of castings by robots, manipulators, machine tools, etc. Note 1 to entry: It is equipped with a tool library, and the robot can automatically replace cleaning tools according to the requirements of the program. 3.12 band cutting machine band saw device for cutting gate and riser of castings with ring endless band Note 1 to entry: It is usually used to cut gate and riser of castings made of light weight metal.
ISO 23472-4:2022 pdf download – Foundry machinery — Vocabulary — Part 4: Abrasive blasting machines and other equipment related to cleaning and finishing for casting
