ISO IEC 23200-1:2021 pdf download – Information technology — Radio frequency identification for item management — Part 1: Interference rejection performance test method between a tag as defined in ISO/IEC 18000-63 and a heterogeneous wireless system.
1 Scope This document defines a test method to evaluate the interference rejection performance of tags covered by ISO/IEC 18000-63 and a heterogeneous wireless system using different access technologies, e.g. radio frequency identification and cell phone network. It specifies the general requirements and test requirements. The test method in this document makes it possible to compare the relative interference rejection performance among tags under a single wireless interference environment. In addition, this document can be used in a benchmarking test according to requirements in a given application or service. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 19762, Information technology — Automatic identification and data capture (AIDC) techniques — Harmonized vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions provided in ISO/IEC 19762 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at https://www.iso .org/obp — IEC Electropedia: available at http://www.electropedia .org/
5.5 Total measurement uncertainty The total measurement uncertainty for each quantity determined by these test methods shall be stated in the test report. NOTE Basic information is given in ISO/IEC Guide 98-3. 5.6 Test result reporting Each test result shall be reported with the DUTs tested. Optionally, for statistical evaluation, minimum value, maximum value, mean value and standard deviation may be reported as well. 5.7 Test mounting material For the tags, the tests may be performed with or without applying a mounting material. When the mounting material is defined by the tag manufacturer, the tests shall be performed with the specified mounting material in free air. If the indicative dielectric parameter or other critical parameters of the material are known, they shall be mentioned in the test report. 5.8 Test communication parameters All of the tests may be performed for various communication parameters (forward and return link). The test conditions shall be recorded in the test report.
ISO IEC 23200-1:2021 pdf download – Information technology — Radio frequency identification for item management — Part 1: Interference rejection performance test method between a tag as defined in ISO/IEC 18000-63 and a heterogeneous wireless system
